FPGA setup and building

From opm
Revision as of 18:03, 21 January 2021 by Gmarchiori (talk | contribs) (Changed format of the git clone command.)
Jump to navigation Jump to search

This page contains instructions on how to setup, compile and use the FPGA bitstream required to run the Flow simulator when compiled with the fpgaSolver enabled (ILU0-BiCGSTAB accelerated solver).

Prerequisites

Using the Flow simulator with an FPGA requires the (offline) generation of a bitstream file, which is loaded into the FPGA at runtime and configures it to make available a specific function, in this case the ILU0-BiCGSTAB solver.
This generation process requires, for the kernel currently present in the FPGA repository, the installation of some Xilinx tools and an additional package to target the Xilinx Alveo U280 board.
Note that, in order to generate the FPGA bitstream, there is no need for an FPGA board to be installed on the host chosen for the generation process.

The bitstream generation has only been tested on Linux systems with CentOS 7 (7.4-7.9).
It may however be possible to use other OS configurations (e.g. Ubuntu 16.04/18.04 as officially supported by Xilinx), but this has not been tested.

Please refer to this page for documentation about:

  • a list of supported OS and minimum hardware requirements in order to compile bitstreams for the Xilinx Alveo boards (Application Acceleration Development Flow)
  • additional packages that may be required on the host (e.g. OpenCL packages, kernel headers, etc.)

The main tools required are:

  • Xilinx Vitis, version 2019.2
    To download the Xilinx Vitis package, a (free) registration to the Xilinx website is required.
    Choose a file under "Vitis Core Development Kit", not the "Update 1" version; for example "Xilinx Unified Installer 2019.2: Linux Self Extracting Web Installer"
  • Xilinx XRT, version 2.3
    Note that the XRT can be used for all the Alveo board versions (not just the U280).
    In the page "Alveo U280 Package File Downloads", click on the button "Archive" in the "Tool Version" line.
    This will expand showing the "2019.2" version button: click on it and leave selected "XDMA" as "Platform Type" and "x86_64" as "Architecture".
    Finally, select the "Operating System" for which you want to download the package (currently either "RHEL/CentOS" or "Ubuntu").
    For example, when selecting "RHEL/CentOS", "OS Version" will appear: select "7.x" and a frame will appear below, named "Download Installer for Alveo U280".
    Select the choice number 1 (Download the Xilinx Runtime): the file to download will be named xrt_201920.2.3.1301_7.4.1708-xrt.rpm

The additional package needed to target the Xilinx Alveo U280 board is:

  • Development Target Platform, version 201920.1
    In the page "Alveo U280 Package File Downloads", click on the button "Archive" in the "Tool Version" line.
    This will expand showing the "2019.2" version button: click on it and leave selected "XDMA" as "Platform Type" and "x86_64" as "Architecture".
    Finally, select the "Operating System" for which you want to download the package (currently either "RHEL/CentOS" or "Ubuntu").
    For example, when selecting "RHEL/CentOS", "OS Version" will appear: select "7.x" and a frame will appear below, named "Download Installer for Alveo U280".
    Select the choice numer 3 (Download the Development Target Platform): the file to download will be named xilinx-u280-xdma-dev-201920.1-2699728.x86_64.rpm

Warning: the Xilinx FPGA shell used to generate the bitstream must be version 201920.1 (XDMA).
Therefore, this shell version must also be the one installed on the Xilinx Alveo U280 FPGA board which is used to run the accelerated flow application.
In principle, the shell version can be changed to a different one (typically a newer one), but the bitstream generation process may fail or generate sub-performing bitstreams (e.g. in case the shell allocates the static resources differently than the one used currently), and changes may be required to the makefiles and other code in the FPGA repository.

Downloading

Download the FPGA repository (read-only) by doing: 

   git clone git://github.com/OPM/FPGA.git

Building

After having installed the Xilinx tools and downloaded the FPGA repository, the following steps are needed to generate the bitstream:

  • setup the Xilinx Vitis environment, e.g.:
   source <path to the Xilinx Vitis base directory>/Vitis/2019.2/settings64.sh
  • setup the Xilinx XRT environment, e.g.:
   source <path to the Xilinx XRT base directory>/source.sh
  • change to the implementation directory and run:
   cd <path to the FPGA repository base directory>/linearalgebra/ilu0bicgstab/xilinx/alveo_u280/vitis_20192/HW-implementation
   make bitstream

Important: in case the Xilinx board package has been installed in a path different than the default one (/opt/xilinx/platforms/xilinx_u280_xdma_201920_1/xilinx_u280_xdma_201920_1.xsa), use the variable PLATFORM_XSA to change its path, e.g.: 

   make PLATFORM_XSA=/path/to/xilinx_u280_xdma_201920_1.xsa bitstream

After the last command finishes successfully (it may take several hours), the following files, among others, will be present in the implementation directory:

  • bicgstab_kernel.xclbin (the bitstream file)
  • bicgstab_kernel.xclbin.info (a text file with a summary of the current bitstream implementation results)

Typically, the bitstream generation process will be mainly constrained by the CPU's cores maximum frequency (the tools don't always use multi-threading), the local storage speed and the amount of RAM.
As an example, the bitstream generation flow has been tested by using an host running with CentOS 7.9 (x86_64), an AMD Ryzen 9 3950X CPU, 64 GB of RAM and a fast RAID5 disk configuration.
The whole generation process took around 3 hours and used around 4 GB of disk space.

Finally, this command can be used to completely clean up the result of a previous implementation; this will delete also the generated bitstream, so use with care! 

   make clean_all

Using the bitstream

To use the bitstream, copy the file bicgstab_kernel.xclbin on the host where the FPGA board is installed.
Please refer to the "Install Guide" in this page for documentation regarding the installation and setup of the Xilinx Alveo U280 board.
The XSA shell installed on the board must be the same specified in the #Prerequisites section.
It may also be possible to use a cloud service provider that makes available nodes with the Alveo U280 board instead of an on-premises host. Please check the Alveo pages for more info about this option.

Moreover, you'll need to use a Flow simulator binary file compiled with FPGA support enabled.
The current source code for the Flow simulator (still under review at the moment of writing) contains modifications to enable the Xilinx Alveo board (see PR #2998, opm-simulators).

The host containing the FPGA board should be already properly setup (e.g. the proper drivers and the Xilinx XRT must be installed and setup).
Then, the following command line parameters can be used to run flow with the FPGA: 

   --accelerator-mode=fpga
   --fpga-bitstream=/path/to/bicgstab_kernel.xclbin
   --matrix-add-well-contributions=true                    # required for FPGA
   --opencl-ilu-reorder=[level_scheduling|graph_coloring]  # optional: the default will be "level_scheduling"

An example command line to run flow with the FPGA accelerator is (set the proper paths before running it!): 

   /path/to/flow /path/to/opm-tests/norne/NORNE_ATW2013.DATA \
    --accelerator-mode=fpga \
    --fpga-bitstream=/path/to/bicgstab_kernel.xclbin \
    --matrix-add-well-contributions=true \
    --threads-per-process=8 \
    --output-dir=./output_norne_fpga

Notes about performance measurements

In order to work with flow, the FPGA must be programmed with the proper bitstream before it makes available the solver kernel functionality.
This is done automatically by flow when it's run with the proper command line parameters as shown in the previous section.
However, when running flow for the first time after the host is started (or if the FPGA has been previously programmed with a different bitstream than the solver), the bitstream will be programmed into the FPGA, and this may take around 6 seconds, thus adding overhead to the total execution time.
The FPGA programming is not needed for successive executions of flow, because the Xilinx runtime (XRT) will recognize that the FPGA is already programmed with the proper bitstream, and there will be no overhead on the total execution time.
Hence, when interested in checking FPGA performance, it is suggested to use one of the following options before executing the tests:

  • run flow in FPGA mode with a small dataset (e.g., SPE1CASE1.DATA found in opm-tests/spe1/): this will load the bitstream and make it available;
  • run the Xilinx programming tool to pre-load the bitstream (xbutil is part of the Xilinx XRT package):
   xbutil program -p /path/to/bicgstab_kernel.xclbin   # if you have more than one FPGA boards on the host, add "-d<number>" to specify which FPGA must be programmed

and then proceed to run with the interesting datasets.
Note: if you have more than one FPGA boards on the host, add "-d<device number>" on the xbutil command line to specify which FPGA must be programmed. Flow will always use only the first Alveo U280 board in the host (e.g. the one with the lowest device number).

Warnings

The FPGA acceleration is still experimental and the solver kernel may not work when the input case exceeds some internal limitations, which may not be directly connected with the input case size.
When this happens, flow will exit with an error.
For example, when running with spe1/SPE10_MODEL1.DATA: 

   [...]
   ERROR: decode_debuginfo_bicgstab: HW kernel was aborted because it ran for more than 2000000000 clock cycles.
   ERROR: detected unrecoverable FPGA error (ABRT=1,SIG=0,OVF=0).
   [...]

or, when running with norne/NORNE_ATW2013.DATA and using graph coloring instead of the default level scheduling reordering (level scheduling would work fine): 

   [...]
   ERROR: Current reordering exceeds maximum number of columns per color limit: 9736/8192.
   ERROR: findPartitionColumns failed (-1).
   [...]

(note that the format of the error messages above may change with the evolution of the source code).

The FPGA acceleration does not support ensemble runs, because currently there is only one solver instance on the FPGA which cannot be shared among different processes.
Hence, the first flow process that starts using the FPGA won't release it until it finishes, barring the use of the FPGA by other processes for the whole run time.

Reporting issues

Issues specific to the FPGA bitstream can be reported in the git issue tracker at: 

   http://github.com/OPM/FPGA/issues
Retrieved from "http://wiki.opm-project.org/index.php?title=FPGA_setup_and_building&oldid=1855"